NEW RCNI TEST SYLLABUS - NEW RCNI STUDY MATERIALS

New RCNI Test Syllabus - New RCNI Study Materials

New RCNI Test Syllabus - New RCNI Study Materials

Blog Article

Tags: New RCNI Test Syllabus, New RCNI Study Materials, Certification RCNI Dump, RCNI Reliable Exam Guide, RCNI Training Courses

Considering your various purchasing behaviors, such as practice frequency. Occasion, different digital equivalents, average amount of time on our RCNI practice materials, we made three versions for your reference, and each has its indispensable favor respectively. All RCNI guide exam can cater to each type of exam candidates’ preferences. The three kinds are PDF & Software & APP version. Besides, we have always been exacting to our service standards to make your using experience better. We are exclusive in RCNI training prep area, so we professional in practice materials of the test.

RUCKUS RCNI Exam Syllabus Topics:

TopicDetails
Topic 1
  • Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.
Topic 2
  • ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2
  • 3 protocols, and ICX services, IPv4
  • IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.
Topic 3
  • RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.
Topic 4
  • ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.

>> New RCNI Test Syllabus <<

The Best RUCKUS - RCNI - New RUCKUS Certified Networking Implementer Test Syllabus

Our RUCKUS RCNI can help you clear exams at first shot. We promise that we provide you with best quality RUCKUS RCNI original questions and competitive prices. We provide one year studying assist service and one year free updates downloading of RUCKUS Certified Networking Implementer exam questions.

RUCKUS Certified Networking Implementer Sample Questions (Q25-Q30):

NEW QUESTION # 25
For multicast clients to stop receiving traffic using a leave request, which protocol must run on the local subnet?

  • A. IGMP Snooping
  • B. PIM Dense
  • C. IGMPv1
  • D. IGMPv2

Answer: D

Explanation:
The Internet Group Management Protocol (IGMP) is used by IPv4 hosts and adjacent routers to establish multicast group memberships. Different versions of IGMP provide varying capabilities for managing these memberships.
IGMPv2 introduced the ability for hosts to send "leave group" messages when they wish to unsubscribe from a multicast group. This feature allows for more efficient management of multicast group memberships by enabling routers to promptly stop forwarding multicast traffic to subnets where there are no interested receivers.
When a host leaves a multicast group in an IGMPv2-enabled network, the following process occurs:
* Leave Message Sent: The host sends an IGMP leave message to the all-routers multicast address (224.0.0.2).
* Query by Router: Upon receiving the leave message, the router sends a group-specific query to determine if there are any remaining members of the multicast group on the local subnet.
* Group Membership Determination: If no hosts respond to the query within a specified time, the router concludes that there are no remaining members and ceases forwarding multicast traffic for that group to the subnet.
This mechanism reduces unnecessary multicast traffic and optimizes network performance.
In contrast, IGMPv1 does not have a leave group message; routers must rely on a timeout period to determine the absence of group members, leading to increased leave latency.
For more detailed information on IGMPv2 and its leave group mechanism, refer to the Cisco documentation on IGMP.


NEW QUESTION # 26
A Core, Aggregation, Edge topology network is running Rapid Spanning Tree Protocol (RSTP). Two switches at the edge are legacy and run 802.1D.
To influence the convergence time of the legacy switches at the edge, where are the timers modified?

  • A. on the two legacy 802.1D switches at the edge
  • B. on the Aggregation switches connected to the legacy edge switches
  • C. the route-only port on the upstream gateway
  • D. on the root bridge at the core

Answer: B


NEW QUESTION # 27
Which device will become the root in the Spanning Tree election process?

  • A. the device with the lowest bridge ID
  • B. the device with root guard enabled
  • C. the device with the highest bridge priority value
  • D. the device with the highest IP address

Answer: C


NEW QUESTION # 28
What are two differences between Class of Service (CoS) and Differentiated Services Code Point (DSCP)? (Choose two.)

  • A. CoS defines priority levels and DSCP manipulates traffic according to these defined priority levels.
  • B. CoS operates at Layer 2 in OSI model, whereas DSCP operates in Layer 3.
  • C. DSCP defines priority levels and CoS manipulates traffic according to these defined priority levels.
  • D. DSCP operates at Layer 2 in OSI model, whereas CoS operates in Layer 3.
  • E. DSCP is simpler and can scale easily as the network grows. CoS becomes more complex as network demand for prioritized data increase.

Answer: A,B


NEW QUESTION # 29
Which command will create VE 2 on an ICX running FastIron 08.0.95?

  • A. ICX(config-vlan-2)# vlan 2 name VE2
  • B. ICX(config-vlan-2)# router-interface ve 2
  • C. ICX(config-vlan-2)# interface ve 2
  • D. ICX(config-vlan-2)# enable

Answer: B

Explanation:
In RUCKUS ICX switches, a Virtual Ethernet (VE) interface, also known as a routed interface, is used to route traffic between VLANs. To create a VE interface and associate it with a VLAN, follow these steps:
* Access VLAN Configuration Mode: Enter global configuration mode and then VLAN configuration mode for the desired VLAN. For VLAN 2, the commands are:
* Create and Associate VE Interface: Within VLAN configuration mode, create the VE interface and associate it with the VLAN using the router-interface command:
router-interface ve 2
This command creates VE interface 2 and links it to VLAN 2.
* Configure the VE Interface: Exit VLAN configuration mode and enter interface configuration mode for the newly created VE interface to assign an IP address:
interface ve 2
ip address <IP_address> <subnet_mask>
Replace <IP_address> and <subnet_mask> with the desired IP address and subnet mask for the VE interface.
By following these steps, you create a VE interface that enables routing for the associated VLAN. This configuration is essential for inter-VLAN routing,


NEW QUESTION # 30
......

RUCKUS RCNI practice questions are based on recently released RUCKUS RCNI exam objectives. Includes a user-friendly interface allowing you to take the RUCKUS Certified Networking Implementer practice exam on your computers, like downloading the PDF, Web-Based RCNI Practice Test ExamTorrent, and Desktop RUCKUS RCNI practice exam ExamTorrent.

New RCNI Study Materials: https://www.examtorrent.com/RCNI-valid-vce-dumps.html

Report this page